Multi-Clad Vacuum Lifter

Capacity: 400kg

A popular choice for installing horizontal and vertical wall panels as well as roofing panels, the Multi-Clad vacuum lifter series comes with the flexibility of 5 configurations to suit varying panel length and shape.

As a solo device, the Multi-Clad can install horizontal wall panels and roof panels up to 8 metres long as well as vertical panels up to 18 metres long, with an overall capacity of 400kg (depending on the number of pads).

This cladding vacuum lifter is loaded with extra safety features including audio-visual low vacuum alert and two independent vacuum circuits, each capable of handling a load on its own for extra safety.

If you’re looking to install panels up to 14 metres, see the Multi-Clad DT5.

For panels up to 17 metres, see the Multi-Clad DT6.

Panels up to 22 metres long can be installed with Multi-Clad Maxi.

If you are looking to hire or purchase a cladding lifter, or require any further information, contact GGR Group today.

Multi-Clad Vacuum Lifter
  • Maximum lifting capacity – 400kg
  • 90° tilt
  • Integrated vacuum meter and charge meter
  • Audio/Visual alarm
  • Battery operated. Battery life up to 10 hours
  • Recharge time, 4-6 hours
  • Intelligent charger system, 110v
  • Not suitable for use in the rain – read more in our safety guide
  • Maximum wind speed for safe use is 29km/h, 18mph, 16.5 knots or 8 m/s
  • Ref: VCL02

Technical Specification

GGR Group - No.1 For Lifting Solutions

Our equipment is available for hire or purchase throughout the UK and beyond. We have three depots in Manchester, Thame and Glasgow, as well as our vast network of dealers across Europe and the UAE.